|
|
Call Toll Free: 1-888-617-7333 ( M - F: 9AM - 5PM ) (SAT: 9AM - 2PM) (SUN: Closed) * All timings CST |
|
|
|
|
|
HONDA TRIMMERS:
Honda String Trimmers and Stick-Edger offer the same advantages as the rest of Honda’s Lawn and Garden products thanks to four stroke engine technology. Both products are highly fuel-efficient and use regular gas. That means there’s no mixing of gas and oil! They run clean and quiet and exceed all EPA and CARB emission standards. They also have the unique advantage of having 360º engines: they can be used and rotated in any position. Show products >
For homeowner and light-to-medium commercial trimming needs, the HHT25SLTA provides ample power and torque to handle the most demanding applications. Thanks to Honda’s mini 4-stroke technology, the GX25 (25cc) engine will not "bog down" or stall even in the thickest grass.
If you ’re a commercial user or homeowner whose requirements include brushcutting along with trimming, The HHT31SLTA and HHT31SUNBA offer the ultimate hand-held solution for heavy-duty trimming and brush removal. The "LTA" model is a standard "loop" handle design and can accommodate a variety of 8" cutting blades. The "UNBA" model features a commercial "bike" handle design for the serious professional whose needs range from regular trimming to clearing heavy brush, saplings and small trees. In addition to the supplied trimmer head and 10" cutting blade, available accessories include a wide variety of special purpose 8" and 10" blades.
Honda String Trimmers and Stick-Edger offer the same advantages as the rest of Honda’s Lawn and Garden products thanks to four stroke engine technology. Both products are highly fuel-efficient and use regular gas. That means there’s no mixing of gas and oil! They run clean and quiet and exceed all EPA and CARB emission standards.
Speedway Sales & Service is an authorized dealer of all Honda trimmers. Our specialized and trained staff is always ready to answer any questions and guide you to the best product. !
|
|
|
| Engine |
GX25 |
| Displacement |
1.53 cu. in. (25 cc) |
| Fuel |
Unleaded Gasoline (86 Octane or higher) |
| Fuel Tank Capacity |
16.9 fl. oz. |
| Carburetor |
Diaphragm Type w/Fuel Pump |
| Idle Speed |
3100 +/- 200 rpm |
| Max. no-load RPM (requires blade
barrier) |
10,000 rpm |
| Dimensions (LxWxH) |
73.5" x 12.7" x 9.6" |
| Dry Weight |
13 lbs |
| Engine Stop Switch |
Slide Type Switch |
| Throttle Control |
Two Motion Trigger |
| Main Pipe Diameter |
1.0" (25.4 mm) |
| Main Pipe Thickness |
.06" (Aluminum) |
| Drive Shaft |
Flexible Steel Cable |
| Shaft Support |
Nylon Support Sleeve |
| Gear Ratio |
1.235 |
| Handle |
Loop Type |
| Cutting Head |
Semi-matic Feed Head-Nylon |
| Single Harness |
Standard |
| Double Harness |
Optional (must be used with all blade applications) |
| Safety Goggles |
Standard |
| Brush Blade |
9 inch Blade Optional (requires Blade Barrier Kit) |
| Blade Barrier Kit |
Optional (must be used with all blade applications) | |
|
| |
|
|
| Honda Engine |
GX31 |
| Displacement |
1.89 cu. in. (31.0 cc) |
| Fuel |
Unleaded Gasoline (86 Octane or higher) |
| Fuel Tank Capacity |
22 fl. oz. |
| Carburetor |
Diaphragm Type w/ Fuel Pump |
| Idle Speed |
3100 +/- 200 rpm |
| Max. no-load RPM (requires blade
barrier) |
10,000 rpm |
| Dimensions (LxWxH) |
70.7" x 13.1" x 10.4" |
| Dry Weight |
16.8 lbs. |
| Engine Stop Switch |
Slide Type Switch |
| Throttle Control |
Two Motion Trigger |
| Main Pipe Diameter |
1.0" (25.4 mm) |
| Main Pipe Thickness |
.063" (Aluminum) |
| Drive Shaft |
Flex 0.25" |
| Shaft Support |
Nylon Support Sleeve |
| Gear Ratio |
1.25 |
| Handle |
Loop Type |
| Blade Type |
8" with 1" hole | |
| |
|
|
|
|
|
|
|
|
|
| © Internet and Phone Sales | 16600 W Cleveland Ave, New Berlin, WI 53151 | Telephone: 1.262.641.7530 | Toll Free: 1.888.617.7333 | Fax: 1.262.641.7545 |
|
|