Honda Water Pumps- Honda Generators, Honda Snow Blowers, Honda Lawnmowers, Honda Tillers, Honda Trimmers and Honda Water Pumps!

Honda Generator, Honda Lawnmower, Honda snow blower, Honda snowblower, Honda Tillers, Honda Trimmers - Call us at 1 888 617 7333

Call Toll Free: 1-888-617-7333 ( M, W, F: 9AM - 5PM ) ( T, TH: 9AM - 7PM ) (SAT: 9AM - 3PM) (SUN: Closed) * All timings CST

HONDA WATER PUMPS:

Honda Water Pumps offer a level of uncompromising performance to a wide variety of water transfer applications. Designed for easy starting, priming and dependable service, used throughout the world for over 20 years, Honda water pumps have earned a reputation for unsurpassed reliability and performance. Show products >

Honda Powered Trash Pumps, Honda Semi-Trash Pumps and Honda Water Pumps for homeowners, contractors and industrial users. Big Savings on a Large Selection of Honda Powered Trash Pumps, Honda Semi-Trash Pumps and Honda Water Pumps made by BE Pressure Supply and Pramac Power Systems. We carry units from 1.5 HP up to 11.0 HP and capable of 25,980 gallons per hour maximum. We also carry a full line of trash and water pump accessories, including strainers, discharge and suction hose and fittings. We also stock aluminum pin-lug or short shank couplings. Your choice of aluminum or glass reinforced polypropylene cam and groove couplings.

Speedway Sales & Service is an authorized dealer of all Honda water pumps. Our specialized and trained staff is always ready to answer any questions and guide you to the best product. !


WX10 Specifications
Engine	GX31, 1.5 HP, OHV
Displacement	31 cc
Bore and Stroke	1.5" x 1.0"
Compression Ratio	8.0:1
Pump Type	General Purpose, Centrifugal, Self-Priming
Priming Time	120 sec. at 16.4 ft.
Drive System	Direct
Discharge Capacity	40 gals./min.
Suction Port Diameter	1.0" NPT
Discharge Port Diameter	1.0" NPT
Total Head Lift	100 ft.
Suction Head Lift	23 ft.
Maximum Pressure	43 psi
Solids Handling	N/A
Dimensions	13.0" x 9.8" x 12.8"
Dry Weight	15.0 lbs
Strainer Part #	78325-YB0-711


WX15 Specifications
Engine	GX50, 2.5 HP, OHV
Displacement	49 cc
Bore and Stroke	1.65" x 1.42"
Compression Ratio	8.0:1
Pump Type	General Purpose, Centrifugal, Self-Priming
Priming Time	120 sec. at 16.4 ft.
Drive System	Direct
Discharge Capacity	72 gals./min.
Suction Port Diameter	1.5" NPT
Discharge Port Diameter	1.5" NPT
Total Head Lift	125 ft.
Suction Head Lift	26 ft.
Maximum Pressure	54 psi
Solids Handling	N/A
Dimensions	12.8" x 10.8" x 14.8"
Dry Weight	19.8 lbs
Strainer Part #	78325-YB0-751


WB20 Specifications
Engine	GX120, 4.0 HP, OHV
Displacement	118 cc
Bore and Stroke	2.4" x 1.7"
Compression Ratio	8.5:1
Oil Alert®	Standard
Pump Type	Centrifugal, Self-Priming
Volute	Rigid Mounted Cast Iron
Impeller	Cast Iron
Mechanical Seal	Silicone Carbide/Silicone Carbide
Priming Time	110 sec. at 16.4 ft.
Drive System	Direct
Discharge Capacity	152 gals./min.
Suction Port Diameter	2.0" NPT
Discharge Port Diameter	2.0" NPT
Total Head Lift	92 ft.
Suction Head Lift	26 ft.
Maximum Pressure	40 psi
Solids Handling	N/A
Dimensions	17.90" x 14.4" x 16.5"
Dry Weight	46.0 lbs
Strainer Part #	78325-YG3-000


WB30 Specifications
Engine	GX160, 5.5 HP, OHV
Displacement	163 cc
Bore and Stroke	2.7" x 1.8"
Compression Ratio	8.5:1
Oil Alert®	Standard
Pump Type	Centrifugal, Self-Priming
Volute	Rigid Mounted Cast Iron
Impeller	Cast Iron
Mechanical Seal	Silicone Carbide/Silicone Carbide
Priming Time	150 sec. at 16.4 ft.
Drive System	Direct
Discharge Capacity	275 gals./min.
Suction Port Diameter	3.0" NPT
Discharge Port Diameter	3.0" NPT
Total Head Lift	85 ft.
Suction Head Lift	26 ft.
Maximum Pressure	37 psi
Solids Handling	N/A
Dimensions	20.1" x 15.2" x 17.9"
Dry Weight	60.0 lbs
Strainer Part #	78325-YG4-000


WH15 Specifications
Engine	GX120, 4.0 HP, OHV
Displacement	118 cc
Bore and Stroke	2.4" x 1.7"
Compression Ratio	8.5:1
Pump Type	High Pressure Centrifugal, Self-Priming
Volute	Rigid Mounted Cast Iron
Impeller	Cast Iron
Mechanical Seal	Carbon/Ceramic
Priming Time	40 sec. at 16.4 ft.
Drive System	Direct
Discharge Capacity	115 gals./min.
Suction Port Diameter	1.5" NPT
Discharge Port Diameter	1.5" NPT
Total Head Lift	127 ft.
Suction Head Lift	26 ft.
Maximum Pressure	55 psi
Solids Handling	N/A
Dimensions	16.3" x 14.2" x 15.9"
Dry Weight	48.5 lbs
Strainer Part #	78325-YB7-020


WH20 Specifications
Engine	GX160, 5.5 HP, OHV
Displacement	163 cc
Bore and Stroke	2.7" x 1.8"
Compression Ratio	8.5:1
Pump Type	High Pressure Centrifugal, Self-Priming
Volute	Rigid Mounted Cast Iron
Impeller	Cast Iron
Mechanical Seal	Carbon/Ceramic
Priming Time	60 sec. at 16.4 ft.
Drive System	Direct
Discharge Capacity	134 gals./min.
Suction Port Diameter	2" NPT
Discharge Port Diameter	2" NPT
Total Head Lift	141 ft.
Suction Head Lift	26 ft.
Maximum Pressure	61 psi
Solids Handling	N/A
Dimensions	16.7" x 14.8" x 15.9"
Dry Weight	51.8 lbs
Strainer Part #	78325-YB7-702


WMP20 Specifications
Engine	GX160, 5.5 HP, OHV
Displacement	163 cc
Bore and Stroke	2.7" x 1.8"
Compression Ratio	8.5:1
Pump Type	Multi-Purpose Centrifugal, Self-Priming
Volute	Rigid Mounted Fiberglass reinforced polyester
Impeller	Fiberglass reinforced polyester
Mechanical Seal	Carbon/Ceramic
Priming Time	65 sec. at 16.4 ft.
Drive System	Direct
Discharge Capacity	220 gals./min.
Suction Port Diameter	2" NPT
Discharge Port Diameter	2" NPT
Total Head Lift	105 ft.
Suction Head Lift	26 ft.
Maximum Pressure	45 psi
Solids Handling	N/A
Dimensions	20.5" x 15.7" x 17.7"
Dry Weight	56 lbs
Strainer Part #	78325-YE0-003


WT30 Specifications
Engine	GX240, 8 HP, OHV
Displacement	242 cc
Bore and Stroke	2.9" x 2.3"
Compression Ratio	8.2:1
Pump Type	Trash Centrifugal, Self-Priming
Volute	Rigid Mounted Cast Iron w/ Stainless Wear Plate
Impeller	Conical Cast Iron
Mechanical Seal	Silicone Carbide/Silcone Carbide
Priming Time	50 sec. at 16.4 ft.
Drive System	Direct
Discharge Capacity	319 gals./min.
Suction Port Diameter	3" NPT
Discharge Port Diameter	3" NPT
Total Head Lift	89 ft.
Suction Head Lift	26 ft.
Maximum Pressure	39 psi
Solids Handling	1 1/16"
Dimensions	26.0" x 19.5" x 20.3"
Dry Weight	132 lbs
Strainer Part #	78325-YG1-003


WT40 Specifications
Engine	GX340, 11 HP, OHV
Displacement	337 cc
Bore and Stroke	3.2" x 2.5"
Compression Ratio	8.0:1
Pump Type	Trash Centrifugal, Self-Priming
Volute	Rigid Mounted Cast Iron w/ Stainless Wear Plate
Impeller	Conical Cast Iron
Mechanical Seal	Silicone Carbide/Silcone Carbide
Priming Time	160 sec. at 16.4 ft.
Drive System	Direct
Discharge Capacity	433 gals./min.
Suction Port Diameter	4" NPT
Discharge Port Diameter	4" NPT
Total Head Lift	85 ft.
Suction Head Lift	26 ft.
Maximum Pressure	37 psi
Solids Handling	1 1/16"
Dimensions	28.9" x 21.1" x 22.2"
Dry Weight	172 lbs
Strainer Part #	78325-YG2-003


WDP20 Specifications
Engine	GX120, 4.0 HP, OHV
Displacement	118cc
Bore and Stroke	2.4" x 1.7"
Compression Ratio	8.5:1
Pump Type	Diaphragm, Self-Priming
Priming Time	20 sec. at 20.0 ft.
Drive System	Direct
Discharge Capacity	60 gals./min.
Suction Port Diameter	2" NPT
Discharge Port Diameter	2" NPT
Total Head Lift	50 ft.
Suction Head Lift	14 ft. dry, 21 ft. primed
Maximum Pressure	N/A
Solids Handling	1.8"
Dimensions	32.5" x 23.4" x 25.0"
Dry Weight	120.0 lbs
Strainer Part #	M51-0000-078


WDP30 Specifications
Engine	GX120, 4.0 HP, OHV
Displacement	118cc
Bore and Stroke	2.4" x 1.7"
Compression Ratio	8.5:1
Pump Type	Diaphragm, Self-Priming
Priming Time	20 sec. at 20.0 ft.
Drive System	Direct
Discharge Capacity	80 gals./min.
Suction Port Diameter	3" NPT
Discharge Port Diameter	3" NPT
Total Head Lift	50 ft.
Suction Head Lift	16 ft. dry, 24 ft. primed
Maximum Pressure	N/A
Solids Handling	2.4"
Dimensions	32.5" x 23.4" x 25.0"
Dry Weight	120.0 lbs
Strainer Part #	M51-0000-080


WSP33 Specifications
Pump Type	Submersible Standard
Manual/Automatic	Automatic
Casing	Stainless Steel
Motor	1/3 HP
Voltage	115
Starting amps	10
Running amps	4
Duty	Continuous
Motor Insulation	Class F
Overhead Protection	Built-In Thermal Automatic Reset
Discharge	Top
Discharge Capacity	40 gal/min
Maximum Head	25 feet
Port Diameter (inches)	1.25 FNPT
Maximum psi	11 psi
Solids Handling	0.375"
Impeller	Glass-filled Noryl 6 Vane
Seals	Tandem Viton Lip Seal
Cord Length	20 feet
Cord Type	Heavy-Duty 115V
Dimensions (W x H)	6.4" x 10.3"
Pump Diameter	6.4"
Dry Weight	11 lbs


WSP50 Specifications
Pump Type	Submersible Trash Pump
Manual/Automatic	Automatic
Casing	Stainless Steel
Motor	1/2 HP
Voltage	115
Starting amps	34
Running amps	8.3
Duty	Continuous
Motor Insulation	Class F
Overhead Protection	Built-In Thermal Automatic Reset
Discharge	Side
Discharge Capacity	110 gal/min
Maximum Head	32 feet
Port Diameter (inches)	2.0 FNPT
Maximum psi	14 psi
Solids Handling	2.0"
Impeller	Single Channel Stainless Steel
Seals	Tandem Mechanical
Cord Length	25 feet
Cord Type	Heavy-Duty 115V
Dimensions (W x H)	9.0" x 21.5" (the discharge port is attached to the side of the volute, therefore the width at the discharge port is larger than the pump diameter)
Pump Diameter	9.0"
Dry Weight	36 lbs


WSP53 Specifications
Pump Type	Submersible Standard
Manual/Automatic	Automatic
Casing	Stainless Steel
Motor	1/2 HP
Voltage	115
Starting amps	36
Running amps	9
Duty	Continuous
Motor Insulation	Class F
Overhead Protection	Built-In Thermal Automatic Reset
Discharge	N/A
Discharge Capacity	44 gal/min
Maximum Head	44 feet
Port Diameter (inches)	1.5 FNPT
Maximum psi	19 psi
Solids Handling	.375"
Impeller	Stainless Steel
Seals	Tandem Mechanical
Cord Length	50 feet
Cord Type	Heavy-Duty 115V
Dimensions (W x H)	8.3" x 17.2"
Pump Diameter	8.3"
Dry Weight	27 lbs


WSP73 Specifications
Pump Type	Submersible Standard
Manual/Automatic	Automatic
Casing	Stainless Steel
Motor	3/4 HP
Voltage	115
Starting amps	48
Running amps	12.2
Duty	Continuous
Motor Insulation	Class F
Overhead Protection	Built-In Thermal Automatic Reset
Discharge	N/A
Discharge Capacity	74 gal/min
Maximum Head	54 feet
Port Diameter (inches)	1.5 FNPT
Maximum psi	23 psi
Solids Handling	.375"
Impeller	Stainless Steel
Seals	Tandem Mechanical
Cord Length	50 feet
Cord Type	Heavy-Duty 115V
Dimensions (W x H)	8.3" x 17.2"
Pump Diameter	8.3"
Dry Weight	27 lbs


WSP100 Specifications
Pump Type	Submersible Trash Pump
Manual/Automatic	Automatic
Casing	Stainless Steel
Motor	1 HP
Voltage	115
Starting amps	47
Running amps	11.1
Duty	Continuous
Motor Insulation	Class F
Overhead Protection	Built-In Thermal Automatic Reset
Discharge	Side
Discharge Capacity	150 gal/min
Maximum Head	42 feet
Port Diameter (inches)	2.0 FNPT
Maximum psi	18 psi
Solids Handling	2.0"
Impeller	Single Channel Stainless Steel
Seals	Tandem Mechanical
Cord Length	25 feet
Cord Type	Heavy-Duty 115V
Dimensions (W x H)	9.0" x 22.8" (the discharge port is attached to the side of the volute, therefore the width at the discharge port is larger than the pump diameter)
Pump Diameter	9.0"
Dry Weight	41 lbs